Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Anti-roll bar to rear axle carrier | M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Anti-roll bar to connecting link | M10 | Initial tightening torque | 50 Nm (37 ftlb.) | ||
| Anti-roll bar to connecting link | M10 | Loosen by 1/4 turn after initial tightening | Loosen by 90° | ||
| Anti-roll bar to connecting link | M10 | Final tightening torque | 65 Nm (48 ftlb.) |