LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Information >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear underbody panel → INSTALLING COVER FOR REAR UNDERBODY .
  2. Fit rear wheels → INSTALLING WHEEL .
  3. Align the vehicle → 449503 SUSPENSION ALIGNMENT, COMPLETE .

    Camber eccentric to control arm → Tightening torque: 100 Nm (74 ftlb.) 

    Toe eccentric to toe control arm → Tightening torque: 100 Nm (74 ftlb.) 

scientia non olet · About LEMON Manuals