WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R): Information: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information

Pay attention to the following in order to remove the support plate without tension:

Lift the vehicle only at the jacking points provided using a uniformly adjusted platform lift. Align lifting arms evenly (in order to avoid distortion).

Fig 1: Overview Of Rear-Axle Carrier Side Section

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1 - Rear-axle carrier side section
2 - Diagonal brace
3 - Support plate
4 - Cross member
7 - V-brace