LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- (981) BOXSTER/CAYMAN >> WM 427119 Removing And Installing Rear Spring Strut (CAYMAN "Black/Style Edition", BOXSTER "Black/Style Edition", CAYMAN Gt4) >> Subsequent Work

Subsequent Work

  1. Fit rear wheel.

    → INSTALLING WHEEL .

    For vehicles with PCCB brake discs, use assembly aids (two assembly pins).

  2. Tighten the axle nut (securing drive shaft to wheel bearing housing). Also apply the brake (2nd mechanic required) while the vehicle is stationary on the ground.

    Tightening torque 460 Nm (340 ftlb.) 

  3. Install rear covers -1-  . → INSTALLING REAR COVER .
    Fig 1: Identifying Rear Cover
    G10023632Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Check wheel alignment values and make adjustments if necessary.

    → 449503 SUSPENSION ALIGNMENT, COMPLETE .

    → 4X00IN ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT .

scientia non olet · About LEMON Manuals