LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN (981) >> WM 535555 Replacing Side Panel (Except BOXSTER, BOXSTER S, BOXSTER GTS, BOXSTER SPYDER) >> Preparing Side Panel For Installation

Preparing Side Panel For Installation

  1. Prepare connection areas for welding and bonding.
    Green Resistance spot-welding
    Yellow Resistance spot-welding + bonding
    Red Plug-welding/apply a full weld using inert gas without bonding
  2. Drill holes in area -A-  .
    G10023439Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    G10023440Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    G10023441Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    G10023442Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Prepare wheel housing at the connection areas for bonding and welding.
    1. 3.1. Drill holes.
      G10023443Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Yellow Resistance spot-welding + bonding
    Red Plug-welding/apply a full weld using inert gas without bonding
scientia non olet · About LEMON Manuals