Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake disc to wheel hub (front and rear axle) | M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Brake calliper to front and rear axle (PCCB and grey cast-iron brakes) | M12 x 1.5/always use new screws on front and rear axle following removal. Different screw length on front and rear axle (see allocation in PET) | Tightening torque | 85 Nm (63 ftlb.) |