Removing Additional Brake Light

→ Remove the ignition key and switch off load before disconnecting or removing load.

Fig 1: Identifying Additional Brake Light Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Open the rear lid.
2. Release and unplug electric plug connection.
3. Carefully detach adhesive tape for additional brake light -1-  from the rear window using a knife.
   Fig 2: Loosening Additional Brake Light

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Lever off additional brake light -1-  at the left and right using a screwdriver and push it up and out.
   Fig 3: Removing Additional Brake Light

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.