LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 - Lights, Lamps, Switches, Exterior -- (981) BOXSTER/CAYMAN >> WM 945719 Removing And Installing Gas-Discharge Control Unit (All Models) >> Installing Gas-Discharge Control Unit

Installing Gas-Discharge Control Unit

  1. Check the sealing face on the control unit and replace the seal if necessary.
  2. Plug in electric plug connections until the connectors engage securely or are pushed in fully.
  3. Secure the control unit with the three fastening screws.
scientia non olet · About LEMON Manuals