Removing Dashboard Molding On Driver's Side (Left)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Dashboard Molding On Driver's Side Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Dashboard molding on driver's side (left)
Dashboard molding on driver's side (right)

Information

To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

Carefully unclip dashboard molding on driver's side (left) -arrow- .

Fig 2: Removing Dashboard Molding On Driver's Side (Left)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off plug connection for light for ignition key -arrow- .

Fig 3: Pulling Light Plug Connection For Ignition Key
Courtesy of PORSCHE CARS NORTH AMERICA, INC.