Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Stud for mounting the rear-axle carrier side section to the body | M12 x 1.5 | Tightening torque | 30 Nm | ||
| Fastening screws securing the rear-axle carrier side section to the body | M12 x 1.5 x 95 | Tightening torque | 90 Nm | + 90° | |
| Fastening nut securing the rear-axle carrier side section to the body | M12 | Tightening torque | 90 Nm | + 90° | |
| Fastening nut securing the rear-axle trailing arm at the rear to the rear-axle carrier side section | M12 x 1.5 | Tightening torque | 90 Nm | + 90° | |
| Fastening nut securing the middle rear-axle trailing arm to the rear-axle carrier side section | M12 x 1.5 | Tightening torque | 90 Nm | + 90° | |
| Fastening nut securing the front rear-axle trailing arm (toe control arm) to the rear-axle carrier side section | M12 x 1.5 | Tightening torque | 100 Nm | ||
| Fastening screw securing the self-levelling sensor holder to the rear-axle carrier side section | M6 x 16 | Tightening torque | 3.4 Nm |