LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 949819 Removing And Installing Control Unit For Automatic Headlight Levelling System (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3) >> Installing Control Unit For Automatic Headlight Levelling System

Installing Control Unit For Automatic Headlight Levelling System

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the sealing face on the control unit for damage.
    1. 1.1. Replace seal if in doubt.
      Fig 1: Installing Automatic Headlight Levelling System Control Unit
      G09999319Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position the control unit and carefully fit it into the plug connection in the headlight.
  3. Secure the control unit with the three fastening screws.
scientia non olet · About LEMON Manuals