LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 945719 Removing And Installing Gas-Discharge Control Unit (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo S, CARRERA 4 "Edition", Turbo S CABRIO, CARRERA 4 Cabriolet "Edition") >> Removing Gas-Discharge Control Unit

Removing Gas-Discharge Control Unit

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Gas-Discharge Control Unit Position
G09999271Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew the three fastening screws -1-  .
    Fig 2: Removing Control Unit
    G09999272Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully pull off the control unit.
  3. Release and pull off connector -2-  (-A-  ).
  4. Pull off connector -3-  .
    5. Fig 3: Removing Control Unit Connectors
    G09999273Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove control unit.
scientia non olet · About LEMON Manuals