LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 945719 Removing And Installing Gas-Discharge Control Unit (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo S, CARRERA 4 "Edition", Turbo S CABRIO, CARRERA 4 Cabriolet "Edition") >> Installing Gas-Discharge Control Unit

Installing Gas-Discharge Control Unit

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the sealing face on the control unit and replace the seal if necessary.
  2. Plug in electric connectors until the connectors engage securely or are pushed in fully.
  3. Secure the control unit with the three fastening screws.
scientia non olet · About LEMON Manuals