Replacing High Beam Halogen Bulb
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Unscrew the four fastening screws on the headlight cover and remove the headlight cover.
- Pull the holder for the halogen bulb out of the headlight.
- Pull off electric connector at the halogen bulb.
- Push halogen bulb onto the electric connector.
- Position holder with halogen bulb and slide it into the mounting.
- Check that holder with halogen bulb is seated correctly.
- Fit the headlight cover on the headlight and secure with the four fastening screws.