Installing Brake Light Switch

Information 

The brake light switch sensor works without contact.

For the switch to work correctly, there must be a specified air gap between the sensor and the baffle plate on the brake pedal.

The baffle plate must not touch the sensor.

When installing, make sure that the brake pedal is in the normal position.

1. Before installing the brake light switch -1-  , press it out of the frame -2-  until the underside is flush with the frame.
   Fig 1: Installing Brake Light Switch

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert the brake light switch -1-  with the frame -2-  into the retaining bracket from above -arrow A-  until the frame's retaining clip latches securely in the retaining bracket.
3. Plug in electric plug connection -3-  (-arrow B-  ).