LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 - Lights, Lamps, Switches, Exterior -- (981) BOXSTER/CAYMAN >> WM 943119 Removing And Installing Tail Light (Except CAYMAN GTS, BOXSTER GTS, BOXSTER SPYDER) >> Installing Tail Light

Installing Tail Light

  1. Connect electric plug connection -arrow A-  until the lock engages securely.
    Fig 1: Connecting Electric Plug Connection For Tail Light
    G10028509Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pre-position the tail light -1-  so that the T-bolts run into the guide rails.
    Fig 2: Installing Tail Light
    G10028510Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Slide in tail light -1-  until the catch -2-  locks securely.
  4. Fit fastening screw -1-  for the tail light and tighten to Tightening torque 2.0 Nm (1.5 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.)  .
    Fig 3: Securing Tail Light In Rear Luggage Compartment
    G10028511Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Fit rubber stopper in the rear luggage compartment -arrow A-  .
    Fig 4: Fitting Rubber Stopper In Rear Luggage Compartment
    G10028512Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Fit rubber stopper -1-  in the wheel housing -arrow A-  .
    Fig 5: Fitting Rubber Stopper In Wheel Housing
    G10028513Courtesy of PORSCHE CARS NORTH AMERICA, INC.