LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> 44 - Wheels, Tires, Suspension Alignment -- PANAMERA (970) >> WM 449503 Suspension Alignment, Complete (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Adjusting >> Adjusting Front Axle Camber

Adjusting Front Axle Camber

WARNING: Steering-angle sensor not calibrated or calibrated incorrectly
  • Unexpected vehicle handling
  • Steering-angle sensor does not function
  • Malfunction in steering-angle sensor

→ After working on wheel suspension parts, when replacing the steering-angle sensor, and after changing the wheel alignment values, calibrate the steering-angle sensor using the Porsche System Tester. → 456005 INITIALIZING AND CALIBRATING STEERING-ANGLE SENSOR

→ Keep the front wheels in straight-ahead position on the measuring platform during calibration.

→ Check the actual value of the steering-angle sensor after suspension alignment where no changes were made to the wheel alignment values.

Specified tightening torque for lock nut on camber eccentric adjuster -1-  : Tightening torque 50 Nm (37 ftlb.) +120° 

Camber is adjusted at camber eccentric -1-  .

Fig 1: Adjusting Camber, Caster, Toe And Front Axle
G09807918Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals