Subsequent Work

Information 

The tightening specifications for the basic engine are stored centrally.

> Refer to 1X001N Technical values in the appropriate service information. 

> Refer to 2X001N Technical values in the appropriate service information. 

or

> 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES AND ASSEMBLY OVERVIEWS

Tightening torques and assembly instructions for other assemblies (e.g. chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.

1. Fit oil guide/oil plate.
   Fig 1: Oil Return (Oil Plate) Components Location (2WD)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Oil return (oil plate), 2WD

   1	Oil guide (oil plate)
   2	Oil return seal
   3	Screw, Mo x 20

   Fig 2: Oil Return (Oil Plate) Components Location (4WD)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Oil return (oil plate), 4WD

   1	Oil guide (oil plate)
   2	Oil return seal
   3	Screw, Mo x 20

2. Install oil pump.

   > 172019 REMOVING AND INSTALLING OIL PUMP

3. Install cylinder heads.

   > 157019 REMOVING AND INSTALLING CYLINDER HEAD

4. Fit timing chain.

   > 153519 REMOVING AND INSTALLING TIMING CHAINS

5. Fit timing-case cover.

   > 153319 REMOVING AND INSTALLING TIMING-CASE COVER

6. Fit oil pan and oil guide housing.

   > 175019 REMOVING AND INSTALLING OIL GUIDE HOUSING

7. Fill in engine oil. For details, see

   > 170117 DRAINING AND FILLING ENGINE OIL (CHANGING ENGINE OIL)

8. Remove engine from assembly support.
9. Mount transmission.

   > WM 373427 REMOVING AND MOUNTING PORSCHE DOPPELKUPPLUNG (PDK) (EXCEPT PANAMERA S E-HYBRID, PANAMERA S HYBRID, PANAMERA EXECUTIVE, PANAMERA GTS, PANAMERA TURBO S,)

   or

   > Refer to 343527 Removing and mounting transmission in the appropriate service information. 

10. Install engine.

    > 100119 REMOVING AND INSTALLING ENGINE