LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- PANAMERA (970) >> WM 103719 Removing And Installing Torque Support (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Torque support to body and valve cover Always use new aluminum screws Initial tightening 20 Nm (15 ftlb.)    
Torque support to body and valve cover   Final tightening 180°    
Torque support to engine bracket and supporting frame M10 Initial tightening 50 Nm (37 ftlb.)    
Torque support to engine bracket and supporting frame M10 Final tightening 90°    
Torque support to engine bracket and supporting frame M10 Initial tightening 50 Nm (37 ftlb.)    
Torque support to engine bracket and supporting frame M10 Final tightening 90°    
scientia non olet · About LEMON Manuals