LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 - Front Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 405755 Replacing Front Wheel Bearing (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Tools And Materials

Tools And Materials

Tool overview for wheel bearing

Fig 1: Identifying Tools For Front-Axle Wheel Bearing
G09807417Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. -1-  - T10205/1 grip pieces Attachments T10205  Pressing out wheel hub, position grip pieces behind wheel hub
  2. -2-  - T10205/2 bell Attachments T10205  Pressing out wheel hub, inserting into grip pieces (wheel hub fits through)
  3. -3-  - T10230/9 pipe Assembly fixture T10230  Pressing in wheel bearing, for positioning the wheel carrier
  4. -4-  - Pressure piece VW 454  Pressing out wheel hub, pressing in bond rubber mounting
  5. -5-  - T 10205/10 pressure piece Attachments T10205  Pressing in wheel bearing and wheel hub
  6. -6-  - T 10205/5 pipe Attachments T10205  Pressing out wheel bearing (wheel bearing fits through pipe T10205/5)
  7. -7-  - Large ram for workshop press (70 mm)  Screwing into the workshop press
  8. -8-  - Press-on sleeve 9694/3  Pressing on wheel hub, for positioning the wheel bearing housing with wheel bearing
  9. -9-  - Separating device Nr.111  Pressing inner wheel bearing race off the wheel hub
scientia non olet · About LEMON Manuals