No Identifiable Deformations On The Body Structure

1. Check seam joining line on the accessories

   → 5X00IN DIAGRAM - BODY GAP DIMENSIONS 

2. Check accessories for paint abrasion (accessories that were impacted during the crash)
3. Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. Measuring unit, professional WE 1397  ) and compare with the required values.
4. Determine the extent of any damage to chassis components

   Measure the chassis electronically if necessary

   → 449503 SUSPENSION ALIGNMENT, COMPLETE

5. Decide whether the vehicle has to be repaired

Repair the vehicle, if necessary.