LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 60 - Sliding Roof, Tilting Roof -- PANAMERA (970) >> WM 604019 Removing And Installing Sliding-Roof Panel (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Adjusting Sliding-Roof Panel

Adjusting Sliding-Roof Panel

  1. Adjust the height at the front sliding-roof panel by moving the panel. → Technical Values 
  2. Tighten fastening screw -2A-  to the specified tightening torque Tightening torque 4.5 Nm +/-0.5 Nm (+/-0.5 ftlb.)  until secure.
  3. Fig 1: Identifying Height At Front Sliding-Roof Panel
    G09810802Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Adjust the height at the rear sliding-roof panel by moving the panel. → Technical Values 
  5. Tighten fastening screw -2B and 2C-  to the specified tightening torque Tightening torque 4.5 Nm +/-0.5 Nm (+/-0.5 ftlb.)  until secure.
  6. Fig 2: Adjusting Height At Rear
    G09810803Courtesy of PORSCHE CARS NORTH AMERICA, INC.