Installing Front Seat-Surface Extension
- Insert seat-surface extension into the seat frame -arrows-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Plug in connector -1-
on the seat-surface extension motor -2-
(-A-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in the two fastening screws -1-
from underneath and tighten to the specified tightening torque. Tightening torque 6.5 Nm (5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Lift up the seat cushion -1-
slightly at the front -A-
and screw in the two fastening screws -2-
and tighten them to the specified tightening torque. Tightening torque 6.5 Nm (5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.