LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front - PANAMERA (970) >> WM 503819 Removing And Installing Lock Carrier (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Preliminary Work

Preliminary Work

  1. Remove front apron, → REMOVING FRONT APRON
  2. Remove cover for front underbody, → REMOVING COVER FOR FRONT UNDERBODY
  3. Remove front part of front wheel housing liner, → Removing Front Part Of Front Wheel Housing Liner 
  4. Remove wire harness at the center air guide, → REMOVING WIRE HARNESS FOR FRONT-END
  5. Remove temperature sensor at the center air guide.
  6. Remove air box for throttle housing, → REMOVING AIR BOX FOR THROTTLE HOUSING (Y-SHAPED PIPE AHEAD OF THROTTLE VALVE)
  7. Disengage operating cable at the lid lock, → REMOVING FRONT LID RELEASE
scientia non olet · About LEMON Manuals