LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Panamera Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 - Lights, Lamps, Switches, Exterior -- PANAMERA (970) >> WM 941555 Disassembling And Assembling Bi-Xenon Headlights (Except PANAMERA S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Disassembling And Assembling Bi-Xenon Headlights >> Disassembling Bi-Xenon Headlights

Disassembling Bi-Xenon Headlights

NOTE: Ignition voltage of the gas-discharge headlight is in the high-voltage range.
  • Contact with live high-voltage components can pose health hazards or can be fatal.

→ Never work on live active electrical systems and equipment. Before getting started, de-energise the system and make sure that the system remains de-energised for the duration of the work.

Information 

Disassembling the headlight simply involves removing/installing the control unit and gas-discharge headlight components.

Do not touch the glass body of the gas-discharge headlight.

  1. Remove fastening screws -arrows-  on the control unit.
    Fig 1: Identifying Fastening Screws On Control Unit
    G09814781Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove control unit from housing.
  3. Unclip control unit connector from the assembly cover.
  4. Remove assembly cover.
  5. Turn bayonet lock on the gas-discharge headlight holder anti-clockwise -arrow-  and remove components.
    Fig 2: Turning To Remove Gas-Discharge Headlight Holder
    G09814782Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Press the clamp on the holder and pull off the connector.
scientia non olet · About LEMON Manuals