LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 404119 Removing And Installing Front Drive Shaft (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Drive Shaft

Preliminary Work For Removing And Installing Front Drive Shaft

  1. Remove hub cap using puller hook 9229  and loosen drive shaft mounting at the side of the wheel before raising the vehicle. Also press the brake while doing so (second mechanic required). → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT 
    Fig 1: Identifying Lock Nut On Drive Shaft
    G09935145Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. For 19-inch brake system:

    Remove air guide. → 407719 REMOVING AND INSTALLING ANTI-ROLL BAR 

  3. Remove connecting link. → 407819 REMOVING AND INSTALLING FRONT CONNECTING LINK 
scientia non olet · About LEMON Manuals