Installing Power-Steering Cooler

Position the cooler -E- and guide it into the holder -3- from the left -D- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Clipping in cooler
Clip in the cooler at the two holders -2- (-C- ).
Secure hydraulic lines to the power-steering cooler.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing hydraulic lines
1. 3.1 Position hose holder -B- and tighten the fastening screw. > Tightening torque 4.5 (3.5 ftlb.) Nm
2. 3.2 Connect both hoses -A- .
3. 3.3 Tighten clamps.
Install centre air guide -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing centre air guide
1. 4.1 Fit air guide -1- on radiator module -arrow- .
2. 4.2 Install clips -4- .
3. 4.3 Tighten screws -5- . > Tightening torque 4.5 (3.5 ftlb.) Nm