Installing Sealing Bellows Of The Steering Column

Information 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Example of markings

• Only replace complete steering columns. Individual components cannot be disassembled and replaced. 
• Visually inspect all parts. 
• Make sure that everything remains absolutely clean. 
• Use the prescribed lubricant on the sliding part (see Parts Information). 
• Fit together both parts of the steering column that were previously marked with -color markings-  .
• The lower steering shaft must slide on the upper steering shaft smoothly and without catching. 

1. Fit sealing bellows on the steering column at the correct position.
2. Slide the lower steering shaft onto the upper steering shaft. Overcome the pressure point with a strong jerk.