Installing Actuator For Electric Parking Brake
WARNING: This page is about a different variant/trim than selected.
- Insert actuator for electric parking brake -1-
and tighten two fastening screws -2-
.
> Tightening torque 2 (1.5 ftlb.) Nm
Removing actuator for electric parking brake
- Carry out a function test.
- The indicator light in the parking brake actuator must be ON when you close it.
- The indicator light in the parking brake actuator must be OFF when you open it.
- Check for locking and release noises from the electric parking brake actuators when you actuate them.