Primary Catalytic Converter/Catalytic Converter

WARNING: This page is about a different variant/trim than selected.

TIGHTENING TORQUE SPECIFICATIONS

Location	Description	Type	Basic value
Primary catalytic converter to exhaust manifold	M8 lock nuts/Always replace nuts following removal	Tightening torque	23 (17 ftlb.) Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Threaded joint for primary cataytic converter
Catalytic converter to primary catalytic converter	M8 lock nuts/Always replace nuts following removal	Tightening torque	23 (17 ftlb.) Nm
Primary catalytic converter to holder	M8 screw	Tightening torque	23 (17 ftlb.) Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Left primary catalytic converter	holder
Catalytic converter to transfer gear holder	M8 screw	Tightening torque	23 (17 ftlb.) Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Catalytic converter holders