Removing The Starter

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of starter

1. Undo electric change-over valve.
   1. 1.1  Pull electric change-over valve -1-  off the holder -Arrow-  and set it aside with the lines connected.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Removing electric change-over valve

2. Unscrew fastening nuts -2 and 3-  on the starter and remove -Arrow-  lines. -4 and 5- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing fastening nuts on starter

3. Unscrew and remove both fastening screws. -6- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening screws for starter

4. Remove the starter.
   1. 4.1  Pull starter -7-  towards the front in direction of travel -Arrow A-  and lift it up. -Arrow B- 
   2. 4.2  Remove -arrow C-  line. -8- 
   3. 4.3  Lift starter -7-  up and remove it. -Arrow D- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing the starter