LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 219019 Removing And Installing Boost Pressure Sensor >> Installing Boost Pressure Sensor

Installing Boost Pressure Sensor

  1. Insert boost pressure sensor into the Y-pipe and install screw.
  2. Connect boost pressure sensor connector -position arrow-  .
G16309256Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Boost sensor connector

scientia non olet · About LEMON Manuals