Removing Clutch Pedal

Remove -clutch power spring on clutch pedal (arrows)- . Compress the clutch power spring (depress pedal lightly). As it becomes free, secure the hole in the bolt of the clutch power spring with a cotter pin or similar.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mount for clutch power spring-
Depress the pedal and pivot the clutch power spring from front to rear through 180° (against direction of travel) -arrow- and unclip from the bearings.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pivoting out clutch power spring
Remove - lock for clutch power spring bolt (arrow)- . If necessary, carefully drive the bolt out with a hammer and drift and take out the clutch power spring.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left lock of clutch power spring
Pull out the lock -1- at the light of the clutch pedal shaft -2- (-arrow- ).

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lock on clutch pedal (example)
Using a hammer, press the brake pedal shaft out by a few millimeters with short blows from right to left.
Insert a screwdriver under the head of the clutch pedal shaft (left side). Carefully lever the clutch pedal shaft out of the clutch pedal.
Separate push rod of the master cylinder from the pedal. To do this, insert the > T10005 - pliers into the cut-outs on the clutch pedal. Remove clutch pedal.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengaging clutch pedal