Technical Values
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Threaded connection securing tie rod to tie-rod ball | Item 3: M16 x 1.5 thread, lock nut | Tightening torque | 90 (67 ftlb.) Nm | ||
| Heat shield to steering gear | Item 8: M6 x 16 thread | Tightening torque | 10 (7.5 ftlb.) Nm | ||
| Threaded connection securing lower trailing arm to chassis subframe | Item 4: M14 x 1.5 thread | Tightening torque | 170 (126 ftlb.) Nm | ||
| No. 8: Threaded connection securing lower trailing arm to rear chassis subframe | M14 x 1.5 thread | Tightening torque | 170 Nm (125.4 ftlb.) | ||
| No. 2: Threading securing tie rod to chassis subframe | M14 x 1.5 thread (always replace bolts and lock nuts after removal) | Tightening torque | 170 Nm (125.4 ftlb.) |