LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (40 - Wheel Suspension Front Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 401519 Removing And Installing Upper Trailing Arm >> Removing Upper Trailing Arm

Removing Upper Trailing Arm

WARNING: This page is about a different variant/trim than selected.
  1. Unclip ABS wire harness -1-  at the body -A-  .
    G16318311Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting point for ABS wire harness to body

  2. Remove level sensor holder from the upper axle support.

    > 431855 REPLACING FRONT LEVEL SENSOR

  3. Unscrew fastening screws -1-  from the upper axle support -2-  .
    G16318312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting point for upper axle support

  4. Remove axle support.