LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 52 (37 - Automatic Transmission - Actuator, Housing (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 373119 Removing And Installing Multi-Functional Switch >> Installing Multi-Functional Switch

Installing Multi-Functional Switch

WARNING: This page is about a different variant/trim than selected.
G16314453Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of multi-functional switch

  1. Fit multi-functional switch on the shifting shaft.
  2. Adjust multi-functional switch.

    >373115 ADJUSTING MULTI-FUNCTIONAL SWITCH 

  3. Connect electric plug connection to the multi-functional switch until it engages securely.
  4. Position heat shield on the transmission.
  5. Tighten fastening screws -Arrows-  .

    > Tightening torque 10 (7.5 ftlb.) Nm --

    G16314454Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat shield

  6. Function test on gear selecting system:
    • Will the vehicle start?
    • Do all selector-lever positions work?
scientia non olet · About LEMON Manuals