Installing Transmission Control Unit

WARNING: This page is about a different variant/trim than selected.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Clip transmission control unit -3- into the holder until it engages securely.
Push transmission control unit -3- into the guides -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pushing in transmission control unit
Tighten fastening screw -2- . > Tightening torque 8 (6 ftlb.) Nm --

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Plugging in connector on transmission control unit
Plug in electric plug connection -1- and lock it -a- .
Position the carpet.