Turbocharger Oil Circuit, Cylinders 5 To 8

WARNING: This page is about a different variant/trim than selected.

Fig 1: Turbocharger Oil Circuit Components Location With Torque Specifcation - Cylinders 5 To 8

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Turbocharger oil circuit, cylinders 5 to 8

1	Oil supply line for turbocharger, cylinders 5 to 8
2	Nut, M6 > Tightening torque 6.5 (5 ftlb.) Nm
3	Holding clamp
4	Vent line on turbocharger for cylinders 5 to 8 > Tightening torque 10 (7.5 ftlb.) Nm
5	Holding clamp
6	Screw, M6 x 12; turbocharger oil feed line holder to lower part of crankcase > Tightening torque 10 (7.5 ftlb.) Nm ; holding clamp for oil feed line to holder > Tightening torque 10 (7.5 ftlb.) Nm
7	Screw, M6 x 16 > Tightening torque 10 (7.5 ftlb.) Nm
8	Oil extraction line
9	Turbocharger seal, cylinders 5 to 8
10	Sealing ring
11	Connection piece > Tightening torque 45 (33 ftlb.) Nm
12	Clamp
13	Holder for oil supply line