Boost Pressure And Ambient Air 2
WARNING: This page is about a different variant/trim than selected.
Boost pressure and wastegate 2
| 1 | Pressure line |
| 2 | Vacuum line |
| 3 | Hose clamp |
| 4 | Screw, M6 x 12 > Tightening torque 10 (7.5 ftlb.) Nm |
| 5 | Holder |
| 6 | Rubber element |
| 7 | Electric change-over valve |
| 8 | Control line |
| A | View A; pressure line connection on intake-air distributor |