LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (13 - Engine - Crank Drive, Pistons (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 137455 Replacing Sealing Ring For Crankshaft Pulley >> Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the four fastening screws -Arrows-  and remove joint flange with sealing ring.
    1. 1.1 Replace joint flange and sealing ring.
    G16307162Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing joint flange with sealing ring

  2. Clean contact surfaces.
scientia non olet · About LEMON Manuals