Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Aluminium screw, M6 | AL9 | Initial tightening | 4 (3 ft lb.) Nm | ||
| Aluminium screw, M6 | AL9 | Final tightening | 90° | ||
| Aluminium screw, M8 | AL9 | Initial tightening | 10 (7.5 ft lb.) Nm | ||
| Aluminium screw, M8 | AL9 | Final tightening | 90° | ||
| Aluminium screw, M10 | AL9 | Initial tightening | 20 (15 ft lb.) Nm | ||
| Aluminium screw, M10 | AL9 | Final tightening | 90° |