Installing Coolant Temperature Sensor

Information 

The tightening specifications for the basic engine are stored centrally.

> 1X00IN TECHNICAL VALUES

/

> 2X00IN TECHNICAL VALUES

or

> 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES AND ASSEMBLY OVERVIEWS .

Tightening torques and assembly instructions for other assemblies (e.g. chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.

1. Fit coolant temperature sensor -3-  in the cylinder head. Tighten coolant temperature sensor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Temperature sensor

   1	Temperature sensor for engine compartment (installation position of cylinder 8)
   2	Sleeve
   3	Temperature sensor (installation position of cylinder 4)

2. Peripheral equipment is installed in reverse order to removal.