| No. 4: Threaded connection securing front upper trailing arm to wheel carrier |
M14 x 1.5 x 102 thread (always replace screws and lock nuts after removal) |
Tightening torque |
150 Nm (111 ftlb.) |
+90 angular degrees |
|
| No. 4: Threaded connection securing rear upper trailing arm to wheel carrier |
M16 x 1.5 x 110 thread (always replace screws and lock nuts after removal) |
Tightening torque |
150 Nm (111 ftlb.) |
+90 angular degrees |
|
| No. 5: Threaded connection securing front upper trailing arm to chassis subframe |
M12 x 1.5 x 70 thread (always replace screws and lock nuts after removal) |
Tightening torque |
90 Nm (67 ftlb.) |
+90 angular degrees |
|
| No. 5: Threaded connection securing rear upper trailing arm to chassis subframe |
M12 x 1.5 x 70 thread (always replace screws and lock nuts after removal) |
Tightening torque |
90 Nm (67 ftlb.) |
+90 angular degrees |
|