Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| No. 3: Threaded connection securing anti-roll bar to suspension/stabilizer (connecting link) | M12 x 1.5 thread | Initial tightening | 90 Nm (66.4 ftlb.) | ||
| No. 3: Threaded connection securing anti-roll bar to suspension/stabilizer (connecting link) | M12 x 1.5 thread | Final tightening | + 90° | ||
| No. 4: Cap screws | M14/M16 thread | Tightening torque | 28 Nm (20.7 ftlb.) |