Removing Rear Tie Rod (Toe Control Arm)

Fig 1: Identifying Tie Rod (Toe Control Arm)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mark the position of the eccentric screw -3- on the tie rod -1- for re-installation -2- .

Fig 2: Identifying Marking For Eccentric Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release tie rod at the chassis subframe (eccentric screw) and wheel carrier. Pull out tie rod.
To make removal easier, raise the wheel carrier slightly using a universal jack! → Lifting wheel bearing housing (example) Use a rubber base to prevent the wheel carrier from slipping!

Fig 3: Lifting Wheel Bearing Housing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.