Tools And Materials: Tools

Tool overview for chassis subframe bearings assembly fixture T10301 

Fig 1: Overview Of Tool For Chassis Subframe Bearings

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. -A-  - → Hydraulic cylinder VAS 6178  (The hydraulic cylinder is used together with the → foot pump VAS 6179  and the → pressure gauge with connecting cable VAS 6179/1 -B-  ).
2. -1-  - Threaded rod (Inserted into the tubular piston cylinder -A-  .)
3. -2-  - Threaded nut (Screwed onto the threaded rod -1-  .)
4. -3-  - Pipe (For pressing out the chassis subframe bearings.)
5. -4-  - Ring (For pressing out the chassis subframe bearings.)
6. -5-  - Press-out plate (For pressing out the chassis subframe bearings.)
7. -6-  - Pressure piece (For pressing in the chassis subframe bearings.)
8. -7-  - Press-in plate (For pressing in the chassis subframe bearings.)
9. -8-  - Ring (For pressing out the chassis subframe bearings.)
10. -9-  - Spacer sleeve (For pressing out the chassis subframe bearings together with pipe -3-  .)
11. -10-  - Pressure piece (For pressing in the chassis subframe bearings.)
12. -11-  - Spacer sleeve (For pressing in the chassis subframe bearings.)

Porsche supplement set T10301/20 

1. -2-  - Threaded nut (Screwed onto the threaded rod -1-  .)
2. -12-  - Press-out ring (For pressing out the chassis subframe bearings.)
3. -13-  - Pressure piece (For pressing in the chassis subframe bearings.)
4. -14-  - Bush (For pressing out the chassis subframe bearings.)
   Fig 2: Identifying Assembly Fixture T10301/20

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.