LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne Diesel >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 400619 Removing And Installing Front-Axle Carrier (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work >> Subsequent Work For Removing And Installing Front-Axle Carrier

Subsequent Work For Removing And Installing Front-Axle Carrier

  1. On vehicles with 19-inch brake system:

    Fit the air guide. → Installing Front Anti-Roll Bar (PDCC) 

  2. Fit engine guard. → 108019 REMOVING AND INSTALLING ENGINE GUARD
  3. Fit the front wheels. → 440519 REMOVING AND INSTALLING WHEEL
  4. Remove engine support at the body. → 1001IN SUPPORTING THE ENGINE ON THE BODY
  5. Bleed the power steering. → 4890IN TEST AND ASSEMBLY WORK ON POWER STEERING
  6. Bleed the PDCC system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
  7. Perform suspension alignment. → 449503 SUSPENSION ALIGNMENT, COMPLETE
scientia non olet · About LEMON Manuals