Removing Vacuum Pump

Information 

• The pictures shown in this document may differ from the original. 

Fig 1: Identifying Installation Position Of Vacuum Pump

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Vacuum Pump With Connections

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Vacuum pump
2. Screw, M6 x 25
3. Sealing ring
4. Sealing ring
5. Secondary load connection

1. Loosen the clamp -1-  on the vacuum line -2-  and pull off the vacuum pump -3-  .
   Fig 3: Identifying Clamp On Vacuum Line

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Disconnect vacuum line -1-  from the vacuum pump -2-  .
   Fig 4: Identifying Vacuum Line From Vacuum Pump

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Remove vacuum pump -1-  .
   1. 3.1. Unscrew screws -2-  .
      Fig 5: Identifying Vacuum Pump Screws

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 3.2. Turn vacuum pump to the side -1-  and remove it.