LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging -- 92A Cayenne >> WM 214319 Removing And Installing Charge-Air Cooler [Cayenne S E-Hybrid & Cayenne (3.0)] >> Removing Charge-Air Cooler >> Assembly Overview - Charge-Air Cooler

Assembly Overview - Charge-Air Cooler

Fig 1: Overview Of Charge-Air Cooler Assembly
G09933464Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Seal replace 
  2. O-ring replace 
    • Coat the charge-air cooler with engine oil during installation
  3. O-ring replace 
    • Coat the charge-air cooler with engine oil during installation
  4. Compressor housing
  5. Seal replace 
  6. Right charge-air cooler
  7. Screw replace → Tightening torque: 10 Nm (7.5 ft. lb.) 
  8. Seal
    • Not available individually
    • Must not be separated from charge-aircooler
    • Coat with engine oil during installation
  9. Screw replace → Tightening torque: 10 Nm (7.5 ft. lb.) 
  10. Left charge-air cooler
  11. Seal
    • Not available individually
    • Must not be separated from charge-aircooler
    • Coat with engine oil during removal and installation
scientia non olet · About LEMON Manuals