| Threaded connection securing brake calliper to front-axle 18-inch wheel carrier |
M14 x 1.5 x 115 thread (always replace screws and lock nuts after removal) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| Threaded connection securing brake calliper to front-axle 19-inch wheel carrier and PCCB |
M14 x 1.5 x 135 thread (always replace screws and lock nuts after removal) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| Brake pressure pipe to brake calliper |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
+/-1 Nm (+/- 0.5 ftlb.) |
|
| No. 4: Threaded connection securing brake hose bracket to wheel carrier |
M6 x 12 thread |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| No. 5: Threaded connection securing cable holder to wheel carrier |
M8 x 14 thread |
Tightening torque |
20 Nm (15 ftlb.) |
|
|